Products

Fibers are housed in a loose tube that is made of high-modulus plastic and filled with tube filling compound. The water blocking tape is applied around the central tube. Then the tubes are armored with a corrugated steel tape (CST) logitudinally. Two parallel steel wires are embeded in the outer PE jacket.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the metallic strength member to form the cable core. The steel tape(CST) is longitudinally armored over the cable core, which is filled with water blocking compound. Finally a PE jacket is extruded.

Fibers are positioned in a central tube made of high-modulus plastic and filled with tube gel. The tube is armored with aramid yars and water blocking yarns. Finally a PE jacket is extruded.

The structure of GYFXY optical cable is to connect 250μThe m optical fiber is inserted into a loose tube made of high modulus material, inside the loose tube Fill with waterproof compound. Two parallel non-metallic FRP reinforcements are placed on both sides of the loose tube and extruded into polyethylene the sheath forms a cable.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member( FRP) to form the cable core. Then the cable core is filled with the cable jelly to protect it from water penetration.Finally a PE jacket is extruded.

The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a metallic central strength member to form a cable core.The core is filled with water-blocking compound and armored with corrugated steel tape(CST). Stranded steel wires are applied as the messenger. Finally, a figure-8 PE outer jacket is extruded.

The structure of GYXTC8S optical cable is to connect 250μThe optical fiber is inserted into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. A layer of double-sided coated steel strip (PSP) is longitudinally wrapped around the loose tube, and a water blocking material is added between the steel strip and the loose tube to ensure the compactness and longitudinal water blocking of the optical cable. It is integrated with the steel wire strand into an 8-shaped polyethylene sheath.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member to form the cable core.The cable core is filled with water blocking compound and PE inner jacket is extruded. Then the aramid yarn twist around the inner jacket to reinforce . Finally, PE outer jacket or AT outer jacket is completed.

The ADSS double-jacketed optical cable is a high-performance communication cable product. It uses a loose tube made of high modulus plastic, filled with gel inside to properly place the optical fibers. The unique structural design of the optical cable takes the non-metallic strengthening member as the center. The tubes and fillers are stranded to form the cable core. The cable core is filled with water-blocking compound and a PE inner jacket is extruded. Then, the tough aramid yarn is twisted around the inner jacket for reinforcement. Finally, the PE outer jacket or AT outer jacket is completed.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. The tube and two FRPs are SZ stranded. The cable core is filled with water blocking yarn.Finally, PE outer jacket or AT outer jacket is completed. One ripcord is applied in the jacket to make the striping easily.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the metallic strength member to form the cable core filled with water blocking compound. An Aluminum tape (APL) is armored longitudinally around the core. Finally a PE jacket is extruded.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the metallic strength member to form the cable core. Then the cable core is filled with water-blocking compound and covered with a PE inner jacket. After the corrugated steel tape (CST) is longitudinally armored over the inner jacket, the cable is completed with a PE outer jacket.