Products

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the metallic strength member to form the cable core. An Aluminum tape(APL) is applied around the core, which is filled with the water-blocking compound. Then the cable core is covered with a PE inner jacket. After the steel tape is longitudinally armored over the inner jacket, the cable is completed with a PE outer jacket.

Water-proof GYFTY33 fiber optic cable is based on the GYFTY fiber optic cable structure, with enhanced waterproof and anti-extrusion functions. After being coated with aluminum tape longitudinally, a layer of PE inner sheath is extruded, and then a single layer or double layer thin round steel wire armor is longitudinally wrapped After installation, the polyethylene outer sheath is finally extruded into a cable.

The structure of GYFXBY flat optical cable is to connect 250 μ The optical fiber is inserted into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. A layer of waterproof layer may be longitudinally wrapped around the loose tube, with two parallel FRP placed on both sides and extruded into a polyethylene sheath PE cable.

The structure of GYXY optical cable is to connect 250μLoose fibers made by inserting high modulus materials into the fiber optic sheath in the sleeve, the loose sleeve is filled with waterproof compound. Apply water blocking material to the loose casing to prevent water damage Ensure the longitudinal water resistance of the optical cable, and place two parallel steel wires on both sides before extruding polyethylene protection Set it into a cable.

The structure of GYFTC8Y optical cable is to insert the optical fiber into a PBT loose tube, which is filled with waterproof compound. The center of the cable core is a non-metallic reinforced core, and a loose sleeve (and filling rope) is twisted around the center reinforced core to form a compact and circular cable core. The cable core and steel wire strands are integrated into an 8-shaped polyethylene sheath.

Mini Figure 8 drop Fiber Optic Cable（GYXTC8Y） which is an excellent stripping performance of tight buffer fiber Cable, its diameter and bending radius are small. It’s full filling with aramid yarn. It can installation freely in narrow room.This cable consist of the loose tube with single mode or multimode fibers and steel wire as the messenger wire, which are formed like”Figure 8”. After aramid yarn is applied over the inner sheath, the cable is completed with a PE outer sheath.

The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a non-metallic central strength member(FRP) to form a cable core. The core is filled with water-blocking compound and armored with laminated Aluminium tape(APL). Stranded steel wires are applied as the messenger. Finally, a figure-8 PE outer jacket is extruded.

LSZH stands for Low Smoke Zero Halogen. The inner structure and parameters of a LSZH cable are similar to other types of fiber optic cables, such as PVC. What makes the LSZH cable stand apart from other cables is its jackets.

LC connector high-performance fiber optic patch cord is designed to meet the demanding requirements of modern network communication for high-speed and stable data transmission. This patchcord uses advanced LC connectors to ensure seamless connection in fiber optic networks, while greatly reducing signal attenuation and transmission losses.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member( FRP) to form the cable core. Then an aluminum tape (APL) is armored longitudinally around the cable core, which is filled with water blocking compound. Finally a PE jacket is extruded.

Uniboot connectors are high-performance fiber optic patchcord designed with unique Uniboot connectors to ensure efficient and stable fiber optic connections. The integrated structure simplifies installation and provides excellent plug and play performance. High quality fiber optic materials reduce transmission losses and ensure clear and stable signals. Suitable for various fiber optic networks, providing reliable connectivity solutions for data centers, enterprise networks, and more.

Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables.