Outdoor Fiber Cable
The outdoor fiber optic cable is sturdily designed to ensure the safe operation of the fiber - optic cable in complex outdoor environments. Outdoor rated fiber optic cable is commonly used in complex building systems and applicable in various conditions like direct burial, in pipelines, overhead, underwater, etc. Outdoor fiber cables can be classified into overhead ones, pipeline ones, directly - buried ones, blown micro cables, and underwater ones.
Send your inquiry
The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the metallic strength member to form the cable core. An Aluminum tape(APL) is applied around the core, which is filled with the water-blocking compound. Then the cable core is covered with a PE inner jacket. After the steel tape is longitudinally armored over the inner jacket, the cable is completed with a PE outer jacket.
Water-proof GYFTY33 fiber optic cable is based on the GYFTY fiber optic cable structure, with enhanced waterproof and anti-extrusion functions. After being coated with aluminum tape longitudinally, a layer of PE inner sheath is extruded, and then a single layer or double layer thin round steel wire armor is longitudinally wrapped After installation, the polyethylene outer sheath is finally extruded into a cable.
The structure of GYFXBY flat optical cable is to connect 250 μ The optical fiber is inserted into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. A layer of waterproof layer may be longitudinally wrapped around the loose tube, with two parallel FRP placed on both sides and extruded into a polyethylene sheath PE cable.
The structure of GYXY optical cable is to connect 250μLoose fibers made by inserting high modulus materials into the fiber optic sheath in the sleeve, the loose sleeve is filled with waterproof compound. Apply water blocking material to the loose casing to prevent water damage Ensure the longitudinal water resistance of the optical cable, and place two parallel steel wires on both sides before extruding polyethylene protection Set it into a cable.
The structure of GYFTC8Y optical cable is to insert the optical fiber into a PBT loose tube, which is filled with waterproof compound. The center of the cable core is a non-metallic reinforced core, and a loose sleeve (and filling rope) is twisted around the center reinforced core to form a compact and circular cable core. The cable core and steel wire strands are integrated into an 8-shaped polyethylene sheath.
Mini Figure 8 drop Fiber Optic Cable（GYXTC8Y） which is an excellent stripping performance of tight buffer fiber Cable, its diameter and bending radius are small. It’s full filling with aramid yarn. It can installation freely in narrow room.This cable consist of the loose tube with single mode or multimode fibers and steel wire as the messenger wire, which are formed like”Figure 8”. After aramid yarn is applied over the inner sheath, the cable is completed with a PE outer sheath.
The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a non-metallic central strength member(FRP) to form a cable core. The core is filled with water-blocking compound and armored with laminated Aluminium tape(APL). Stranded steel wires are applied as the messenger. Finally, a figure-8 PE outer jacket is extruded.
The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member( FRP) to form the cable core. Then an aluminum tape (APL) is armored longitudinally around the cable core, which is filled with water blocking compound. Finally a PE jacket is extruded.
The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member( FRP) to form the cable core and the core is filled with water-blocking compound. Then the corrugated steel tape(CST) is longitudinally armored over the cable core. Finally a PE jacket is extruded.
Fibers are housed in a central tube made of high-modulus plastic and filled with tube gel. The tube is armored with aramid yarns and water blocking yarns. Then the corruagted steel tape (CST )is enhanced around the tube. Finally a PE jacket is extruded.
The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member to form the cable core. An Aluminum tape(APL) is applied around the cable core, which is filled with the water-blocking compound. Then the cable core is covered with a PE inner jacket. After the corrugated steel tape(CST) is longitudinally armored over the inner jacket, the cable is completed with a PE outer jacket.
Steel wire armored fibre optic cable Underwater or Direct Buried 48 96 Core GYTS33 Fiber Optic Cable
The 250um fiber is placed in a loose tube made of high modulus plastic.The tube is filled with a waterproof compound. The steel wire at the center of the core serves as a metal strength member.The tube (and compound) is twisted around the strength member into a compact round cable core. A corrugated steel tape is applied around the cable core to fill the filling compound to prevent water ingress.The cable core is then covered with a thin polyethylene inner sheath.After the inner sheathed steel wire is installed. The cable is finally finished with a polyethylene outer sheath.
no data
no data