Fiber Optic Cable

GJFJV simplex cable useф900μm orф600μm flame-retardant tight buffer fiber as optical communication medium,the tight buffer fibers wrapped with a layer of aramid yarn as strength member element, and the cable is completed withe a PVC or LSZH(Low smoke,Zero halogen,Flame-retardant) jacket.

The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member( FRP) to form the cable core. Then the core is filled with water blocking yarns and longitudinally wrapped with water blocking tapes. The cable is completed with a PE outer jacket.

The zipcord cable is made by evenly applying strands of Aramid yarns as the strength member over ф900μm or ф600μm tight buffer fibers and then is completed with PVC(LSZH)jacket. A duplex fiber optic cable consists of two strand fibers of glass or plastic, and it can be regarded as two simplex cables. This duplex zipcord cable is carefully structured in a zip-cord arrangement, which is most often used for duplex communication between devices where require simultaneous, bi-directional data transfer. (One fiber transmits data one direction and another fiber transmits data in the opposite direction.)

The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a metallic central strength member to form a cable core. The core is filled with water-blocking compound and then armored with laminated aluminum tape(APL). Finally, a LSZH outer jacket is extruded.

The duplex flat optical cable uses two 900μm or 600μm tight buffered fibres as optical transmission medium, covered with aramid yarns as the strength member. A PVC inner sheath is extruded on each fibres, then a flat PVC outer sheath is extruded. Other sheath materials are available on request.

The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a metallic central strength member to form a cable core, which filled with water blocking compound. Then the core is armored with corrugated steel tape( CST). Finally, a LSZH outer jacket is extruded.

The duplex flat optical cable uses two 900μm or 600μm tight buffered fibres as optical transmission medium, covered with aramid yarns as the strength member. A PVC inner sheath is extruded on each fibres, then a flat PVC outer sheath is extruded. Other sheath materials are available on request.

The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube gel. The tubes (and fillers) are stranded around a non-metallic central strength member to form a cable core. Then, a LSZH outer jacket is extruded.

Multi-Purpose Break-out Cable use simplex cable (Φ900μm tight buffer fiber, and aramid yarn as strength member units) as submit, a fiber reinforced plastic(FRP) locates in the center of core as a non- metallic strength member. The subunits are stranded around the cable core, and the cable completed with PVC or LSZH material jacket.

Optical fibres are housed in loose tubes that are made of high-modulus plastic and filled with tube filling compound. The tubes (and fillers) are stranded around a non-metallic central strength member to form a cable core. The gap of core is filled with water-blocking yarns or longitudinally wrapped with water-blocking tape.Then a LSZH outer jacket is extruded.

MFC cable use several Φ250um colored fiber as optical communication medium, the colored fiber wrapped with a layer of aramid yarn as strength member units. and the cable completed with PVC or LSZH material jacket.

The fibers are positioned in loose tubes that are made of high-modulus plastic and filled with tube filling compound. The tubes (and fillers) are stranded around a non-metallic central strength member(FRP) to form a cable core. The core is filled with water-blocking compound, and armored with laminated aluminum tape(APL).Then a LSZH outer jacket is extruded.